5th Gen 4 Runner(2010+) Dual Swing-Out Rear Bumper

Description
Questions and Answers
Carrier Arm Accessory Details
Warranty/Terms
Install Guide
Latch Info

One of its Kind Dual Swing-Out design for the 5th Gen 4 Runner 2010-2024

An industry-first latch mechanism and swing motion design keep things tight and rattle-free during extended or strenuous off-road adventures.

Specifications

· Comprised of 3/16" and 1/4" inner structure and a 3/16" thick outer skin

· Approximate weight 250lbs

· 1" thick 3/4 recovery shackle mounts

· Optional textured black powder coat (see pricing options below).

· Utilizes stock receiver hitch

· Integrated light ports fit a 4" light

· Designed and made in the USA

· Industry-first latch mechanism design for consumer ease of use

· Single swing arm option available

· Model years equipped with the blindspot monitor may not function with an aftermarket bumper due to the monitor's capability to sense through steel.

*Please note that the drop pin on your dual carrier arm is not intended as a safety catch for an arm in motion. The drop pin is designed for locating your arm in a locked position while controlling the arm load. Always remember Newton’s first law as it applies to your arm.

*Please note: A narrow wheel with an extreme positive offset and a very wide tire will not work with the standard tire mount

We highly recommend customers wait until they have the product in hand to schedule installations.

This product contains chemicals known to the state of California to cause birth defects or other reproductive harm. For more information go to www.p65warnings.gov

Q: Hi, I absolutely love the design of your dual swing out bumper for the 4Runner. I'm a little weight conscious with my build and am wondering if you could do the arms in aluminum to help save weight. Thanks, Bryan

Asked by: Bryan Stern - 10/25/2020

A: This bumper is only made in steel, and not aluminum

Was this answer helpful? 5 of 10 Customer(s) found this Answer helpful.

Answer provided by: Exp One -Noah (10/27/2020)

Submit an answer

Q: I have a 5th gen 4runner and the Gobi rear ladder. I want to get your dual swing bumper, does the Gobi ladder fit on the hatch with the dual swing bumper?

Asked by: Simon Bojkovsky - 1/9/2021

No Answers have been submitted yet.

Submit an answer

Q: Does the 4Runner 2010-2024 Rear Bumper w/Dual Swing Carrier System have a tow rating?

Asked by: 4Runner Guy - 7/15/2025

A: The majority of our bumpers ( exceptions being the Jeep TJ and Sprinter bumpers) are designed to work with the stock/oem tow hitch. Our bumpers are not designed for and have not been rated for flat towing ( from a motorhome or similar ).

Was this answer helpful? 0 of 0 Customer(s) found this Answer helpful.

Answer provided by: Sarah Fonnesbeck (7/15/2025)

Submit an answer

Questions about this item? Ask here.

BUNDLES:

BASE: 1x Universal Tire Mount.

WASATCH: 1x Universal Tire Mount. Geri Flat Panel 2 Can Mount/Latches Only.

TETON: 1x Universal Tire Mount. 2x NATO Scepter Can mount.

YOSEMITE: 1x Universal Tire Mount. 1x Geri Flat Panel 2 Can Mount/Latches Only. 1x Hi-Lift/PullPal Combo mount.

MOAB: 1x Universal Tire Mount. 2x NATO Scepter Can mount. 1x Tri-Mount Bar. 1x Vertical Hi-Lift Jack Mount.

Denali Edition - 1x Universal Tire Mount, 1x QUAD Geri Flat Panel Mount (4 Can Mount+Latches Only),

UINTA: 1x Universal tire Mount. 1x Pelican Case Mount (Pelican BX50 Case)

Dual Swing System Accessories FAQ

All accessories for the dual tire carrier systems are optional; add-on features that are bolt-on installation and can be added later as well as at time of purchase with your rear bumper.

How many accessories can I carry on one arm? Typically, a spare tire will take up entire mounting space available on one side of a dual swing system. If you are purchasing a single swing variant of a dual swing system, you would only have room to mount the tire and no other accessories on the one arm.

A non-tire bearing arm can hold any combination of up to 3 additional accessories with the purchase of a Tri-mount bar. Standard mounting without the tri-mount bar allows you to mount any 2 accessories (excluding the Quad Geri mount which takes up all the mount space on a swing arm). A tri-mount bar would allow you to “float” a 3^rd accessory by allowing the accessories to be mounted to the bar which is then mounted to the arm.

Spare Tire Mount: Tire mounts include 3 studs and lugs and are designed to be universal in nature, working with a variety of aftermarket options, apart from a narrow wheel with an extreme positive offset and a very wide tire- this option may require you utilize a spacer to work with our tire mount bracket (we do not supply spacers).

Geri Flat Panel Fuel and Water Packs: Expedition One’s Geri brand flat panel water and fuel containers hold just over 4 gallons of fluid and may be mounted with our unique Geri Mount brackets and latches on both single and dual swing arm systems. Due to changes in regulations on portable fuel container spouts, our fuel version packs are only available for sale for use outside of the USA.

Expedition One Geri mount plates and latches and extension pieces (which allow you to mount more than one can to a plate) are compatible with Rotopax full-bodied fuel cans 4 and 4.5 gallons. This does not include Rotopax cans that unlock/come apart.

The Expedition One QUAD Geri mount system allows you to mount up to 4, flat panel Expedition One or Rotopax cans on one of your swing arm systems. No additional accessories can be mounted on the same swing arm as a Quad can mount due to limited spacing.

NATO/Scepter Can Mounts: The NATO/Scepter can mount is the more traditional square shaped metal or plastic fuel or water can. NATO can mounts can be mounted both flush to the arm or perpendicular to accommodate install of more accessories.

Hi-Lift Jack Mount/Pull-Pal Mounts: Dual tire carrier systems offer a Hi-Lift jack mount and a Hi-Lift jack and Pull-Pal mount combo options. This bracket mounts the Hi-Lift Jack and/or Pull-Pal vertically on the tire carrier arm.

Ladders and Tables: The ladder and table options for the 4Runner, Lexus, and FJ Dual swing-out systems mount on the top and inside of a swing arm respectively and would not be counted as one of the 2-3 accessories mounted on an arm. For example, a 4Runner, Lexus, and FJ dual swing could have a ladder, table, hi-lift jack mount, and 1-2 NATO can mount/mounts.

Back-Up Camera & License Plate Relocation Brackets: Truck dual rear systems and Gladiator dual rears have an optional aluminum back-up camera relocation bracket which relocates the camera to just above the license plate. 4Runner, Lexus, and FJ dual swing out systems have a combo license plate/backup camera relocation bracket option as well as an option to relocate just the license plate. These also do not count towards one of the 3 accessories that can be mounted on a swing arm system as they are not mounted on the arm, but on the rear door.

4Runner 10-24 Dual Swing Carrier System Rear Bumper

Choose Options

One of its Kind Dual Swing-Out design for the 5th Gen 4 Runner 2010-2024

Q: Hi, I absolutely love the design of your dual swing out bumper for the 4Runner. I'm a little weight conscious with my build and am wondering if you could do the arms in aluminum to help save weight. Thanks, Bryan

Q: I have a 5th gen 4runner and the Gobi rear ladder. I want to get your dual swing bumper, does the Gobi ladder fit on the hatch with the dual swing bumper?

Q: Does the 4Runner 2010-2024 Rear Bumper w/Dual Swing Carrier System have a tow rating?

Related Items

Browse Similar Items

Recently Viewed Items