Sprinter 19+ Model Rear Bumper with Dual Swing Arms

Product Features:

Fits 2019+ model years
Comprised of heavy-duty 3/16 inch steel
Optional Textured Black Powder Coating
Highly configurable accessory options
Integrated 1 inch thick shackle mounts can accommodate a 3/4 inch shackle
Retains blind spot monitor locations
Built in receiver hitch rated for recovery only
Integrated light ports hold a 4.75 inch round light
100% Made in the USA with Rocky Mountain steel

· Sensor holes included but will require the purchase of bezels from Ex1 or your local dealership.

*Please note that the drop pin on your dual carrier arm is not intended as a safety catch for an arm in motion. The drop pin is designed for locating your arm in a locked position while controlling the arm load. Always remember Newton’s first law as it applies to your arm.

** Due to vehicle variations and sensitivities associated with certain sensors and various accessory configurations such as large MT tires and/or low-hanging accessory with geometry that may echo or reverberate the ultrasonic sound from OEM park sensors, we cannot guarantee their use or function. Sensor bezels available for purchase from Ex1 or your local dealership PN 68449575AA. *We strive to make a high quality product that functions with the new technology that many new vehicles offer. We include locations for vehicle sensors whenever possible however we cannot guarantee their function to the oem specifications. Proper function may require calibration from oem/manufacturer dealership

We highly recommend customers wait until they have the product in hand to schedule installations.

This product contains chemicals known to the state of California to cause birth defects or other reproductive harm. For more information go to www.p65warnings.gov

Optional Accessories:

Spare Tire Mount
Geri Can Mount
NATO/Scepter Can Mount
Hi-Lift Mount
Hi-Lift/Pul Pal Mount Combo
See Accessory FAQ tab for more information about accessory bundle options

Q: Will this be available for the 2023 3500 awd ext ? Ty be blessed mike

Asked by: michael a terlizzi - 1/23/2023

No Answers have been submitted yet.

Submit an answer

Q: What is the weight of this bumper and can a larger storage box be mounted to a swing arm

Asked by: Dennis Mccrillis - 10/18/2023

A: The dual swing bumper weighs approximately 200lbs.
The arm weight carrying capacity is recommended at no more than 150lbs per arm.

Was this answer helpful? 0 of 0 Customer(s) found this Answer helpful.

Answer provided by: Sarah Fonnesbeck (10/18/2023)

Submit an answer

Questions about this item? Ask here.

Dual Swing System Accessories FAQ

BUNDLES:

BASE: 1x Universal Tire Mount.

WASATCH: 1x Universal Tire Mount. Geri Flat Panel 2 Can Mount/Latches Only.

TETON: 1x Universal Tire Mount. 2x NATO Scepter Can mount.

YOSEMITE: 1x Universal Tire Mount. 1x Geri Flat Panel 2 Can Mount/Latches Only. 1x Hi-Lift/PullPal Combo mount.

MOAB: 1x Universal Tire Mount. 2x NATO Scepter Can mount. 1x Tri-Mount Bar. 1x Vertical Hi-Lift Jack Mount.

DENALI EDITION: 1x Universal Tire Mount. QUAD Geri Flat Panel Mount (4 Can Mount/Latches Only). Diode Dynamics SS3 LED Lights -Flood Pattern w/ wiring harness.

All accessories for the dual tire carrier systems are optional, add-on features that are bolt-on installation and can be added at a later date as well as at time of purchase with your rear bumper.

How many accessories can I carry on one arm? Typically, a spare tire will take up entire mounting space available on one side of a dual swing system. If you are purchasing a single swing variant of a dual swing system you would only have room to mount the tire and no other accessories on the one arm.

A non-tire bearing arm can hold any combination of up to 3 additional accessories with the purchase of a Tri-mount bar. Standard mounting without the tri-mount bar allows you to mount any 2 accessories (excluding the Quad Geri mount which takes up all the mount space on a swing arm). A tri-mount bar would allow you to “float” a 3^rd accessory by allowing the accessories to be mounted to the bar which is then mounted to the arm.

Spare Tire Mount: Tire mounts include 3 studs and lugs and are designed to be universal in nature, working with a variety of aftermarket options with the exception of a narrow wheel with an extreme positive offset and a very wide tire- this option may require you utilize a spacer to work with our tire mount bracket (we do not supply spacers).

Geri Flat Panel Fuel and Water Packs: Expedition One’s Geri brand flat panel water and fuel containers hold just over 4 gallons of fluid and may be mounted with our unique Geri Mount brackets and latches on both single and dual swing arm systems. Due to changes in regulations on portable fuel container spouts, our fuel version packs are only available for sale for use outside of the USA.

Expedition One Geri mount plates and latches and extension pieces (which allow you to mount more than one can to a plate) are compatible with Rotopax full-bodied fuel cans 4 and 4.5 gallons. This does not include Rotopax cans that unlock/come apart.

The Expedition One QUAD Geri mount system allows you to mount up to 4, flat panel Expedition One or Rotopax cans on one of your swing arm systems. No additional accessories can be mounted on the same swing arm as a Quad can mount due to limited spacing.

NATO/Scepter can mounts: The NATO/Scepter can mount is the more traditional square shaped metal or plastic fuel or water can. NATO can mounts can be mounted both flush to the arm or perpendicular to accommodate install of more accessories.

Hi-Lift Jack Mount/PullPal Mounts: Dual tire carrier systems offer a Hi-Lift jack mount and a hi-liftjack and PullPal mount combo options. This bracket mounts the Hi-Lift Jack and/or PullPal vertically on the tire carrier arm.

Ladders and Tables: The ladder and table options for the 4Runner, Lexus, and FJ Dual swing-out systems mount on the top and inside of a swing arm respectively, and would not be counted as one of the 2-3 accessories mounted on an arm. For example, a 4Runner, Lexus, and FJ dual swing could have a ladder, table, hi-lift jack mount, and 1-2 NATO can mounts.

Sprinter 2019+ Dual Swing Carrier System Rear Bumper

Choose Options